Residential Standby Diesel Generator 125kva 100kw Shangchai Diesel Generator Sets With Spare Parts
Standard configuration :
Engine: Shangchai
Alternator: Stamford / Leroy Somer/Marathon
Cooling Fan with fan guard and front guard
Alternator: Single bearing, IP23, H class
24V Charger
Shock Absorber
Dry Air Filter. Dual Fuel Filter. Engine Oil Filter Coolant Filter.
MCCB Circuit Breaker
Standard Control Panel; ATS for optional
Start Battery with connecting cable
Storage Battery and battery line, Exhaust pipe,Corrugated pipe for anti-vibration, Cone Tube,Flange, Muffler
Soundproof Enclosure / Canopy for optional
| Generating Set Model | Prime | Standby |
| APS-125 | 125KVA/100KW | 149KVA/119KW |
| Generating Set Model | Length (L) mm | Width (W) mm | Height (H) mm | Net
kg (lb) | Gross
kg (lb) |
| APS-125 | 2300 | 900 | 1300 | 1420 | 1470 |
| APSS-125 | 2920 | 1080 | 1670 | 1760 | 1810 |
| Dry = With Lube Oil Wet = With Lube Oil and Coolant |
| Ratings and Performance Data |
| Engine Brand | SDEC |
| Engine Model | SC4H180D2 |
| Alternator Brand | Stamford |
| Alternator Model | UC274E / UCI274E |
| Control System | Smartgen HGM6120N |
| Circuit Breaker Type | / |
| Frequency / Phase | 50Hz/ Three phase |
| Engine Speed ( RPM) | 1500Rpm |
| Fuel Tank Capacity (L) | 210 |
| Fuel Consumption rate (g/kW.h) | 198 |
| Model Type | Open / Silent |
| Standard Package | Plywood case/ Plastic |
| Noise Level@7m (dBA) | 70 |
| Generator set Manufacture | Acepow |
| Oil Consummption (g/kW.h) | ≦0.3 |
| Volatage (V) | 220/230/240 |
| Silencer Noise Reduction (dBA) | 10-20 |
| Engine Model | SC4H180D2 |
| Engine Brand | Sdec |
| Number of Cylinders | 4 |
| Cylinders Arrangerment | Vertical in-line |
| Bore/Stroke (mm) | 105/124 |
| Speed (RPM) | 1500 |
| Displacement (L) | 4.3 |
| Compression Ratio | 16:1 |
| Aspiration | air-air intercooled |
| Starting method | Electric motor start |
| Engine Type | In-line,4 strokes, water-cooled,4 valves, Turbo charged, air-to-air intercooled |
| Prime power (kw) | 120 |
| Standby Power(kw) | 132 |
| Prime power (L/h) | 28.6 |
| Standby Power (L/h) | 31.7 |
| Governing Type | Electrical |
- Factory Inspection, the test items before delivery are mainly as follows :
- Each genset shall be put into commission more than 4 hours totally. They are tested on idle load, fully load and 10% overload;
- The noise level is tested
- All of the meters on the control panel shall be tested
- The appearance of the genset and all of the label and nameplate shall be checked
