Cummins Powered Natural Gas Standby Generator Silent Canopy Natural Gas Generator Set
Features :
Standard Requirements for Natural Gas
1. Methane should be at least 95%
2. The natural gas temperature should be between 0-60 ℃
3. No impurity should be in the gas. Water in the gas should be less than 20g/Nm3.
4. Heat value should be at least 8500kcal/m3, if less than this value, the power of the engine will be declined.
• Models with "N" for Natural gas (CNG, PNG, LNG, Shale Gas, Oilfield Associated Gas and Coalmine Gas etc).
• Special configurations for Soundproof Canopy & Container, ATS and Synchronizing Parallel System are available for options.
• Special configuration of CHP, CCHP (trigeneration), Cogeneration are available for options.
| Genset | Genset Model | APL-70G | APL-80G |
| Rated Power (KW/KVA) | 70/88 | 80/100 |
| Standby Power (KW/KVA) | 77/96 | 88/110 |
| Rated Voltage | 220/380,230/400;etc |
| Genset Weight open type(kgs) | 1200 | 1200 |
| Genset Size open type (mm) | 2350*1100*1400 | 2350*1100*1400 |
| Engine | Engine Brand | Lovol | Lovol |
| Engine Model | 1006TANG | 1006TANG |
| Type | Closed water-cooled,in line,4-stroke,1500RPM |
| Intake Type | Natural |
| No. of Cylinder | 4.L |
| Bore×Stroke(mm) | 100×127 |
| Piston Speed (m/s) | 7.62 |
| Compression Ratio | 10.5:01 |
| Mechanical Governor Rated | ≦5% |
| Electronical Governor Rated | ≦1% |
| Noise Level (dBA) | ≦95 |
| ExhaustTemperature(℃) | 600 |
| Rated gas Consumption(CUM/kwh) | 0.36 |
| Displacement(L) | 3.99 |
| Start method | Electric |
| Alternator | Alternator Model | UC224G | UC274C |
| Rated Output (KW) | 70 | 80 |
| Rated Frequency (Hz) | 50/60 |
| Power Factor | 0.8 |
| Winding connection | 3 phase 4 wires connected |
| Excitation method | Brushless |
| Insulation class | H |
